Audi Workshop Service and Repair Manuals > A4 Mk1 > Power transmission | 6-Speed manual gearbox 01E Four-wheel drive | Gearbox mechanics,operation, construction,diff. | Servicing shift mechanism for vehicles as of 05.99 to 11.00, ident. no. 8D-X-260 001 to 8D-1-100 000

6-speed manual gearbox 01E Four-wheel drive

Servicing shift mechanism for vehicles as of 05.99 to 11.00, ident. no. 8D-X-260 001 to 8D-1-100 000

Servicing gear stick and push rod - rear

Note:

Apply polycarbamide grease, part no.

G 052 142 A2 to bearings and contact surfaces.



Circlip ◆ Replace Spacer bush Spring Ball stop ◆ Removing and installing ◆ Apply polycarbamide grease G 052 142 A2 to ball ◆ Insert spring and bushing in ball stop and attach to gear stick such that spring and bushing are located on right in direction of travel ◆ Install before inserting circlip (Item 19) Spring



Bushing ◆ Installation position: Rounded side facing gear stick when installed ◆ Apply polycarbamide grease G 052 142 A2 Gear stick ◆ Only fits in one position in ball stop (item 10) ◆ Removing and installing Spacer ◆ Apply polycarbamide grease G 052 142 A2 Hexagon nut, 10 Nm Cover



Circlip ◆ Take out before removing ball stop Washer ◆ Collar facing ball guide (Item 20) Rubber ring Ball guide ◆ Removing and installing Push rod - rear ◆ With ball housing ◆ Removing and installing Bolt, 6 Nm ◆ 4x ◆ For attaching push rod - rear to gear stick housing

Audi Workshop Service and Repair Manuals