Audi Workshop Service and Repair Manuals

• ATF pump with -B2- piston
• -B2- components
• ◆ =>Page 00-18
• Reverse gear clutch -K2-
• Shims for clutch play
• ◆ Shims of various colours and thicknesses
• 1st to 3rd gear clutch -K1-
• ◆ Clutches -K1- and -K3- may be pressed together
• 3rd and 4th gear clutch -K3- with turbine shaft
• ◆ Clutches -K1- and -K3- may be pressed together

• Axial needle bearing with washer
• Free wheel with -B1- piston
• -B1- components
• ◆ =>Page 00-17
• ATF screen
• Gasket
• ◆ Press onto suction collar on ATF oil screen -arrow- by hand
• Valve body

-B1- components

• Circlip
• ◆ For supporting tube -B2-
• Circlip
• ◆ For freewheel
• Free wheel with -B1- piston
• Dished spring
• Pressure plate -B1-
• Inner plate -B1-
• Outer plate -B1-
• Shim

-B2- components

There are two versions of this brake.

•     A -    Brake -B2- withcorrugated spring washer
• ◆ Code letters=>from Page 00-3

• Corrugated spring washer
• Outer plate -B2-

or

•     B -    Brake -B2- with retaining ring
• ◆ Code letters=>from Page 00-3

• Retaining ring
• Shim
• Outer plate -B2-
• ◆ 3 mm thick

Clutches

Note:

There are two versions of clutches -K1- and -K3-.

•     A -    Clutches are pressed together -Item 3+4+5-
• ◆ Clutches do not have to be pressed apart
•     B -    Clutches can be fitted together loosely

• Reverse gear clutch -K2-
• Shims for clutch play
• ◆ Up to 3 shims may be installed

• 1st to 3rd gear clutch -K1-
• O-ring
• 3rd and 4th gear clutch -K3- with turbine shaft
• Axial needle bearing with washer

Valve body with ATF screen

• ATF strainer
• Gasket
• ◆ Press onto suction collar on ATF screen -arrow- by hand
• Valve body
• ◆ Does not include conductor strip; this must be ordered separately if needed.
• Freewheel sealing plug
• ◆ Must be ordered separately if needed.
• O-ring
• O-ring
• Operating rod for manual selector valve
• ◆ With steel spring and bolt