Audi Workshop Service and Repair Manuals

• ‒ Connect up vehicle diagnostic, testing and information system VAS 5051 and select vehicle system "02 - Gearbox electronics". Ignition must be on.

→ Display on VAS 5051:

• ‒ From list -1- select diagnosis function "02 - Interrogating fault memory".

→ Display on VAS 5051:

•     1 -    Content of fault memory:
• - 0 faults detected
• or
• - X faults detected
•     2 -    Fault
• - Fault code
• - Fault location
• - Type of fault

A - Faults detected:

• ‒ Print out information on screen or self-diagnosis log.
• ‒ Terminate function "02 - Interrogating fault memory" by touching
  ◂ key.

→ Display on VAS 5051:

• ‒ Following display and print-out of last fault, eliminate faults as per fault table => Page 01-42 onwards.
• ‒ Select diagnosis function "02 - Interrogating fault memory" again in list -1- and erase fault memory => Page 01-183.
• ‒ From list -1- select diagnosis function "06 - End of output"
  => Page 01-185.

B - No fault detected:

• ‒ Terminate function "02 - Interrogating fault memory" by touching
  ◂ key.
• ‒ Select diagnosis function "06 - End of output" in list => Page 01-185.