| –
| Attach transportation tool -3457- to attachment points on gearbox housing and secure in place. |
Note | t
| The bolt on the transportation tool -3457- must only be screwed hand-tight into gearbox. |
| t
| The gearbox housing may be damaged if pliers are used to tighten the bolt. |
| –
| Use workshop hoist -VAS 6100- to place gearbox into engine and gearbox support -VAS 6095-. |
Note | If the gearbox is full and it is to be turned in the engine and gearbox support so that the oil pan points upwards, the breather holes for the gearbox housing and final drive must be sealed. |
|
|
|
