Audi Workshop Service and Repair Manuals

Special tools and workshop equipment required

• ◆ Special tool 3301
• ◆ Special tool 3350
• ◆ Special tool 3367

Removing

• ● Lock carrier in service position =>Page 13-1.

• ‒ → Swivel tensioner in direction of arrow to slacken off ribbed belt.
• ‒ Detach ribbed belt from alternator belt pulley.
• ‒ Release tensioning element.

Note:

The air conditioner ribbed belt remains fitted.

• ‒ → Counter hold pulley for viscous fan with 2-hole pin wrench 3212 and unscrew from bracket with 8 mm Allen key -1- .

• ‒ → Pull bearing out of bracket using nut from assembly tool 3301, bolt 3367/3 and tube 3350.

Installing

Install in reverse order, paying attention to the following:

• ‒ → Press in bearing with press tool 3367 and nut from assembly tool 3301.

• ‒ → Bolt viscous fan onto mount -1-, bracing viscous fan pulley with pin wrench 3212 to do so.
• ‒ Install ribbed belt =>Page 13-24.
• ‒ Install lock carrier =>Page 13-1.

Tightening torque