|
Removing and installing lubrication system components
Removing and installing lubrication system components
Notes:
-
◆ If large quantities of metal swarf or abrasion particles are found in the engine oil in the course of engine repair work, the oil ducts are to be carefully cleaned and the oil cooler replaced so as to prevent further damage.
-
◆ Oil level must not be above max. mark, otherwise catalytic converter could be damaged.
-
◆ Oil spray jet and pressure relief valve
=> Fig.17-6
-
◆ Heed current information on the use of sealants.
=> Parts List
Viscosity classes and oil specifications:
=> Maintenance
Oil capacities:
=> Exhaust Emission Test binder
| 
