Audi Workshop Service and Repair Manuals

Test requirements:

• ● Engine oil temperature at least 60 ° C
• ● Vehicle on a flat surface
• ● Wait a few minutes after switching off engine to allow oil to flow back into sump

Test sequence

• ‒ Pull out dipstick, wipe off with a clean cloth and insert it again as far as it will go.
• ‒ Then pull out dipstick again and read off oil level.

→ Markings on dipstick:

•     a -    Donot top up oil.
•     b -    Oil can be topped up. Oil level may then rise as far as area -a-.
•     c -    Oilmustbe topped up. After topping up, it is sufficient for oil level to be somewhere in area -b- (hatched area).

Note:

Oil level must not be above mark -a- on dipstick.