Removing
-
‒ Remove sump and baffle plate => Page 17-10.
-
‒ → Screw out bolt -2-.
-
‒ Pull chain sprocket off oil pump shaft.
-
‒ Screw out bolts -1- and -3- and detach oil pump.
Installing
Install in reverse order, paying attention to the following:
-
‒ Insert dowel sleeves in top of oil pump.
-
‒ Installation position of oil pump shaft/chain sprocket: Can only be fitted in one position
-
‒ Install sump => Page 17-22.
-
‒ Pour in engine oil and check oil level.
Tightening torques
|
---|
Component
|
|
Nm
|
Chain sprocket to oil pump shaft
|
20 + 90°1)2)
|
Oil pump to cylinder block
|
|
16
|
1) Replace bolt
2) 90°corresponds to quarter of a turn
|