audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Tightening torque > < Removing

A4 Mk1

Installing
Installing
  Note!
Do not lubricate sealing lip and external edge of oil seal before pressing in.
   
–  Place guide sleeve -T10053/1- onto crankshaft journal.
–  Slide oil seal over guide sleeve.
  N13-0513
–  Press oil seal on as far as the stop using press sleeve -T10053- and bolt -T10053/2-.
–  Renew centre bolt for toothed belt sprocket.
  N13-0514
–  Secure crankshaft sprocket; to do so, counterhold sprocket with counterhold tool -3415-.
  Note!
t  Contact surface between toothed belt sprocket and crankshaft must be free of oil.
t  Do not lubricate bolt for crankshaft sprocket.
–  Fit toothed belt (adjust valve timing) → Chapter.
–  Install poly V-belt → Chapter.
–  Install lock carrier → Chapter.
  A13-0338

Tightening torque > < Removing