A4 Mk1
| Poly V-belt drive for air conditioner - exploded view of components |
WARNING
|
| 1 - | Bracket |
| 2 - | Air conditioner compressor |
| q | After removing compressor from mountings, secure it to longitudinal member with wire or similar. Do not leave it suspended from refrigerant pipes. |
| q | Do not unscrew or disconnect refrigerant hoses or pipes. |
| 3 - | Dowel sleeve |
| q | Check for correct seating in bracket |
| 4 - | 33 Nm |
| 5 - | Bracket for air conditioner compressor |
| 6 - | Tensioning roller for poly V-belt |
| 7 - | Washer |
| 8 - | 23 Nm |
| 9 - | Poly V-belt |
| q | Check for wear |
| q | Do not kink |
| q | Before removing, mark direction of rotation with chalk or felt-tipped pen. If the belt runs in the opposite direction when it is refitted, this can cause breakage. |
| q | Removing and installing → Chapter |
| q | Routing of poly V-belt → Anchor |
| 10 - | Washer |
| 11 - | 25 Nm |
| 12 - | Retaining clamp |
| 13 - | 6 Nm |
