–
| Pull back heat insulation sleeve and disconnect hose at secondary air pipe by pressing release tabs -arrows-. |
Note –
| Connect an auxiliary hose to pipe leading to combination valve for secondary air and blow lightly into pipe with your mouth (do not use compressed air). |
l
| The combination valve for secondary air should be closed; it should not be possible to blow through the hose. |
–
| Blow into pipe with your mouth using more pressure (do not use compressed air). |
l
| The combination valve for secondary air should open; it should now be possible to blow through the hose. |
If combination valve for secondary air does not open: |
–
| Renew secondary air combination valve → Chapter. |
|
|
|