-
‒ → Press retaining tab, and at the same time pull the sender unit out of baffle housing in fuel tank -arrows-.
Note:
The baffle housing is shown without the fuel tank for a clearer illustration.
Installing
-
‒ Insert fuel gauge sender into guide on outer section of baffle housing and press down until it clicks into place.
-
‒ Wrap wire for fuel gauge sender once round return pipe (in tank).
-
‒ Install flange .
-
‒ After connecting battery, enter anti-theft code for radio
=> Radio operating instructions
-
‒ Close windows fully using electric window switches.
-
‒ Then operate all electric window switches again for at least one second in the "close" direction to activate the automatic one-touch function.
-
‒ Set clock to correct time.
|