Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Checking valves >
< Valve dimensions
A4 Mk1
Power unit
6-cylinder diesel direct injection engine (TDI), mechanics
Engine cylinder head, valve gear
Valve gear
Checking valve guides
Checking valve guides
Checking valve guides
Special tools and workshop equipment required
t
Universal dial gauge bracket -VW 387-
t
Dial gauge -VAS 6079-
Procedure
Note
t
If the valve has to be renewed as part of a repair, use a new valve for the measurement.
t
Only insert inlet valve into inlet guide and exhaust valve into exhaust guide, as the stem diameters are different.
–
Insert valve into guide.
l
End of valve stem must be flush with valve guide.
–
Secure dial gauge -VAS 6079- to cylinder head with universal dial gauge bracket -VW 387- as shown in illustration.
–
Measure the amount of sideways play.
Wear limit:
l
Inlet valve guide: 1.0 mm
l
Exhaust valve guide: 1.3 mm
–
If the wear limit is exceeded, repeat the measurement with new valves.
–
Renew cylinder head if wear limit is still exceeded.
Note
Valve guides cannot be renewed.
Power unit
6-cylinder diesel direct injection engine (TDI), mechanics
Engine cylinder head, valve gear
Valve gear
Checking valve guides
Checking valves >
< Valve dimensions