A4 Mk1
| Poly V-belt drive for air conditioner compressor - exploded view |
| 1 - | Poly V-belt |
| q | Before removing, mark direction of rotation with chalk or felt-tipped pen |
| q | Removing and installing → Chapter |
| q | Check for wear |
| q | When installing, make sure it is properly seated on pulleys |
| 2 - | Cover |
| q | For tensioning roller |
| 3 - | Bolt |
| q | 22 Nm |
| 4 - | Tensioning roller |
| q | For poly V-belt |
| q | Removing and installing → Chapter „Removing and installing poly V-belt for A/C compressor“ |
| 5 - | Bracket |
| q | For AC compressor |
| 6 - | Dowel sleeve |
| q | 2x |
| q | Check for correct seating in bracket |
| 7 - | Bolt |
| q | 22 Nm |
| 8 - | Bolt |
| q | 22 Nm |
| 9 - | Refrigerant lines |
| q | Do not unbolt or disconnect |
| 10 - | Bolt |
| q | 22 Nm |
| 11 - | Air conditioner compressor |
| q | After detaching, secure compressor to subframe using wire or similar. Do not leave it suspended from refrigerant pipes. |
| q | Do not unscrew or disconnect refrigerant hoses or pipes. |
| q | When installing check dowel sleeves -item 6- |
