audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Exhaust system > < Charge air cooler - exploded view

A4 Mk1

Removing and installing charge air cooler
Removing and installing charge air cooler
   
Removing
  Note
If there are slight impressions on the fins, refer to → Chapter.
l  Lock carrier must be in service position → Chapter.
–  Detach air hose (top) from charge air cooler.
  Note
The illustration shows the left-side charge air cooler.
  A10-0310
–  Unplug electrical connector -arrow- at intake manifold pressure sender -G71-.
–  Disengage charge air cooler and take out from underneath.
Installing
Installation is carried out in the reverse order; note the following:
  Note
t  Hose connections and hoses for charge air system must be free of oil and grease before assembly.
t  Secure all hose connections with the correct type of hose clips (same as original equipment) → Electronic parts catalogue.
  A10-0315

Exhaust system > < Charge air cooler - exploded view