audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Contact corrosion! > < Rules for cleanliness when working on fuel supply system, injection system and turbocharger
Checking for leaks in the fuel system
Checking for leaks in the fuel system
–  Allow engine to run for several minutes at moderate rpm.
–  Switch off ignition.
–  Check complete fuel system for leaks.
–  If leaks are found although the connections have been tightened to the correct torque, the relevant component must be renewed.
–  Road-test vehicle and accelerate with full throttle at least once.
–  Then check high-pressure part of fuel system again for leakage.
   

Contact corrosion! > < Rules for cleanliness when working on fuel supply system, injection system and turbocharger