Audi Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Valve dimensions >
< Removing and installing camshafts and camshaft adjusters
A4 Mk1
Power unit
6-Cylinder engine (5-valve turbo), Mechanics
Engine cylinder head, valve gear / Servicing valve gear
Checking camshaft axial clearance
6-Cylinder engine (5-valve turbo), Mechanics
Servicing valve gear
Checking camshaft axial clearance
‒
Remove camshafts .
‒
Remove tappets.
‒
Fit camshafts in cylinder head without drive chain and secure by tightening bearing caps 2 and 4.
‒
→ Attach dial gauge to cylinder head with universal dial gauge bracket VW 387.
‒
Press camshaft against dial gauge by hand.
‒
Set dial gauge to -0-.
‒
Press camshaft away from dial gauge.
‒
Note reading on gauge:
New
Wear limit
0.05 ... 0.15 mm
0.20 mm
Power unit
6-Cylinder engine (5-valve turbo), Mechanics
Engine cylinder head, valve gear / Servicing valve gear
Checking camshaft axial clearance
Valve dimensions >
< Removing and installing camshafts and camshaft adjusters