Removing and installing parts of lubrication system
Checking oil level
Test conditions
● Oil level should always be checked with the engine warm (oil temperature above 60°C).
● The vehicle must be standing on level ground when checking the oil level. Wait for a few minutes after switching off the engine to allow the oil to flow back into the sump.
Test sequence
‒ Pull out the dipstick, wipe off with a clean cloth and insert it again as far as it will go.
‒ Pull out the dipstick again and read off the oil level.
→ Markings on oil dipstick:
a - Do not top up oil.
b - Oil can be topped up. The oil level may rise as far as area -a- after topping up.
c - Oil must be topped up. It is sufficient if the oil level is somewhere in area -b- (grooved area on dipstick) after topping up.
Note:
The oil level must not be above marking -a- on the dipstick.