A4 Mk1
Secondary air system - exploded view of components |
1 - | Combination valve for secondary air (right-side) |
q | Fitting location → Fig. |
q | Checking → Chapter |
q | Removing and installing → Chapter |
2 - | Gasket |
q | Renew |
3 - | 10 Nm |
4 - | 22 Nm |
5 - | Y piece |
6 - | Secondary air inlet valve -N112- |
q | Fitting location → Fig. |
q | Checking → Chapter |
7 - | 6 Nm |
8 - | From vacuum reservoir |
q | Fitting location: in front left wheel housing beneath liner |
9 - | Combination valve for secondary air (left-side) |
q | Fitting location → Fig. |
q | Checking → Chapter |
q | Removing and installing → Chapter |
10 - | Gasket |
q | Renew |
11 - | Connection |
12 - | Gasket |
q | Renew |
13 - | Pressure hose |
q | Check that it is securely seated |
q | Press together at front to release |
14 - | O-ring |
q | Renew |
15 - | Connecting pipe |
q | To combination valves for secondary air inlet |
q | Removal and installation involve taking out intake manifold → Chapter |
16 - | Connection |
|
Note
|