A4 Mk1
| Charge air cooling - exploded view |
Note| Illustration shows left-side charge air cooler. |
| 1 - | Front air duct |
| 2 - | Retaining clip, 5.5 Nm |
| q | Reinforced |
| 3 - | Air hose |
| q | Between turbocharger and charge air cooler |
| q | Must be free of oil and grease when installing |
| 4 - | Air hose |
| q | Between charge air cooler and throttle valve module -J338- |
| q | Must be free of oil and grease when installing |
| 5 - | Retaining clip, 5.5 Nm |
| q | Reinforced |
| 6 - | Mounting for charge air cooler |
| q | 2x |
| 7 - | Bracket |
| 8 - | 10 Nm |
| 9 - | Washer |
| 10 - | Rubber grommet |
| 11 - | Charge air cooler |
| q | Removing and installing → Chapter |
| 12 - | Panel bolt |
