-
‒ → Unplug connector for lambda probe and expose wiring.
- 1 - (brown) to lambda probe upstream of catalytic converter -G130
- 2 - (black) to lambda probe upstream of catalytic converter -G39
Note:
To gain access to the connector screw out coolant expansion tank bolts and swivel expansion tank aside. Fuel hoses remain connected.
-
‒ Screw out Lambda probe using special tool 3337.
When installing, note the following points:
Notes:
-
◆ The screw thread on the lambda probe is coated with assembly paste. This paste must not be allowed to penetrate the openings on the probe.
-
◆ Tightening torque 55 Nm.
-
◆ When installing, the lambda probe wire must be secured in exactly the same position as before in order to avoid contact between the wire and the exhaust pipe.
|