Self-diagnosis for the Motronic system
Technical self-diagnosis data
Features
-
◆ The data transfer between control unit and vehicle diagnostic, testing and information system VAS 5051 or fault reader V.A.G 1551 takes place in "Rapid data transfer" mode.
-
◆ The fault memory is a non-volatile memory and thus independent of the power supply.
-
◆ Faults related to EPC are additionally indicated by the warning lamp for the electronic throttle control ("EPC warning lamp") which is situated in the dash panel insert.
-
◆ If the engine control unit detect faults that cause the exhaust emission values to deteriorate, these faults will be indicated by illumination of exhaust gas warning lamp -K83. Significance of exhaust warning lamp -K83 .
-
◆ Each time after erasing the fault memory the readiness code must be renewed => Page 01-71.
|