A4 Mk1
→ Location of the EPC warning lamp When the ignition is switched on, the engine control unit checks all the components of importance to the electronic throttle system. After switching on the ignition the engine control unit switches on the EPC warning lamp. The EPC lamp goes out shortly after starting the engine, if, on the one hand, the engine control unit does not detect any faults in the EPC system, and, on the other, if actuation of the lamp by the engine control unit is OK. If a fault is detected in the electronic throttle system while the engine is running, the engine control unit switches on the EPC warning lamp. (These faults are listed in the fault table). At the same time, an entry is made in the engine control unit fault memory. |