Audi Workshop Service and Repair Manuals

• ‒ Unplug connector for lambda probe
• ‒ Undo cable ties.
• ‒ Use V.A.G 3337/9 to unscrew lambda probe.

When installing, note the following points:

Notes:

• ◆ When installing, the cable ties must be re-fitted at exactly the same points in order to prevent contact between the Lambda probe wire and the exhaust pipe.
• ◆ Tightening torque 50 Nm.
• ◆ The screw thread on the lambda probe is coated with assembly paste. This paste must not be allowed to penetrate the openings on the probe.