audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Readout specifications for data bus > < Readout specifications for engine power output
TDI® diesel direct injection and glow plug system (4-cyl. unit injector)
Reading measured value block
Readout specifications for charge pressure control

Display Group 011 at full throttle (road test, coolant temperature not below +80 °C)

Important: Always observe safety precautions => Page 01-1.

Important: Observe rules for road test at full throttle => Page 01-78.

Read measured value block 11

◂ Indicated on display

XXXX rpm

XXXX mbar

XXXX mbar

XX %

Duty cycle (activation) of charge pressure control solenoid valve -N75: 40 ... 95% okay

Current charge pressure 1750 ... 2150 mbar: okay
▪ < 1750 mbar: or > 2150 mbar:
▪ Charge pressure control defective, turbocharger defective => test 6)

Charge pressure specified by control unit: 1750...2150 mbar okay
▪ > 2150 mbar: charge pressure increased as a result of tuning

Engine speed
▪ 2850...3150 rpm okay

6) Testing charge pressure control:

Readout specifications for data bus > < Readout specifications for engine power output