audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing rear lid release switch E165 - USA vehicles > < Removing and installing door contact switch

A4 Mk1

Removing and installing interior monitoring deactivation switchE183
Removing and installing interior monitoring deactivation switch -E183-
   
Removing
–  Switch off ignition and take out ignition key.
–  Remove B-pillar trim on driver's side → Rep. Gr.70.
–  Unplug electrical connector.
–  Use small screwdriver to press in fastener of switch on side.
–  Press interior monitoring switch -E183--arrow- to front out of B-pillar trim.
Installing
Installation is carried out in the reverse order; note the following:
–  Install B-pillar trim → Rep. Gr.70.
  A96-0410

Removing and installing rear lid release switch E165 - USA vehicles > < Removing and installing door contact switch