Audi Workshop Service and Repair Manuals > A4 Mk1 > Vehicle electrics | Electrical system | Lights, lamps, switches inside, anti-theft system | Servicing switches | Removing and installing rear lid release switch E165

Removing and installing rear lid release switchE165 - USA vehicles

Removing and installing rear lid release switch -E165- - USA vehicles

Removing

–	Remove front door trim → Rep. Gr.70.

–	Detach insulation and soundproofing mat from door trim → Rep. Gr.70.

–	Unscrew bolts

–	Lift console slightly out of door trim and unplug electrical connector.

–	Remove console with rear lid release switch -E165- out of door trim.

–	Detach grommet -1-.

Installing

Installation is carried out in the reverse order; note the following:

–	Fit insulation and soundproofing mat to door trim → Rep. Gr.70.

–	Install front door trim → Rep. Gr.70.

Tightening torque

Component	Nm
Console to door trim	1.5

Audi Workshop Service and Repair Manuals