audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing window switches (driver's side) > < Removing and installing switch for glove box light

A4 Mk1

Removing and installing mirror adjustment switch
Removing and installing mirror adjustment switch
   
Removing
–  Remove front door trim → Rep. Gr.70.
–  Detach insulation and soundproofing mat from door trim → Rep. Gr.70.
–  Remove bolts -1-.
–  Release retaining hooks -2- and retaining clips -3-.
–  Remove top section of handle recess from front of door trim.
  A70-0244
–  Carefully release retaining hooks -1- in direction of -arrow-.
–  Release retaining lugs -4- and remove mirror adjustment motor -3- from top section of handle recess.
Installing
Installation is carried out in the reverse order; note the following:
–  Fit insulation and soundproofing mat to door trim → Rep. Gr.70.
–  Install front door trim → Rep. Gr.70.
Tightening torque
  A70-0243
ComponentNm
Top section of handle recess to door trim1.5

   

Removing and installing window switches (driver's side) > < Removing and installing switch for glove box light