audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing front seat heating switches - vehicles from 02.1999 > < Removing and installing switches in centre console - vehicles up to 01.1999

A4 Mk1

Removing and installing switches in centre console - vehicles from 02.1999
Removing and installing switches in centre console - vehicles from 02.1999
Special tools and workshop equipment required
   
t  Removal wedge -3409-
  W00-0016
t  Radio release tool -T10057-
  W00-1042
Removing
–  Remove radio/monitor navigation system → Rep. Gr.91.
  Note
Electrical connectors remain connected.
–  Use removal wedge -3409- to carefully release trim -1-.
  A96-10331
–  Release clips -1- and -3- using radio release tool -T10057-.
–  Carefully pull switch mounting -item 2- with switch out of dash panel in direction of -arrow-.
  A96-10333
–  Unplug electrical connectors -1- and -2-.
–  Press retaining spring -arrow- and press switches -4- and -5- from the rear out of switch mounting -3-.
Installing
Installation is carried out in the reverse order; note the following:
–  Push switch unit into mounting in dash panel and ensure it is properly engaged.
  A96-10334

Removing and installing front seat heating switches - vehicles from 02.1999 > < Removing and installing switches in centre console - vehicles up to 01.1999