audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Removing and installing switches in centre console - vehicles from 02.1999 > < Removing and installing headlight range control regulator E102 - vehicles up to 01.1999
Removing and installing switches in centre console - vehicles up to 01.1999
Removing and installing switches in centre console - vehicles up to 01.1999
   
Removing
–  Use adhesive strip to mask area above switches -2-.
–  Use a small screwdriver -1- to pry off cover -3- on switch in direction of -arrow- (support bottom cover with finger if necessary).
  A96-10339
–  Use universal or flat-nose pliers -1- to pull switch -2- out of switch mounting.
–  Unplug electrical connector.
Installing
Installation is carried out in the reverse order; note the following:
–  Carefully press cover onto pushbutton switch until you hear it engage.
–  Press pushbutton switch with fitted cover into mounting in dash panel.
  A96-10340

Removing and installing switches in centre console - vehicles from 02.1999 > < Removing and installing headlight range control regulator E102 - vehicles up to 01.1999