audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing fog lights - Audi RS 4 > < Removing and installing fog lights - Audi A4

A4 Mk1

Removing and installing fog lights - Audi S4 / RS 4
Removing and installing fog lights - Audi S4 / RS 4
   
Removing
–  Switch off ignition and take out ignition key.
–  Turn light switch to position “0”.
Audi S4:
–  Release retaining hooks -arrows- using a screwdriver and detach air intake grille from bottom of bumper.
–  Remove air intake grille by pivoting forwards.
  A02-0122
Audi RS 4:
–  Unscrew bolts -2- and -3-.
–  Remove air intake grille -1- by pivoting forwards -arrow-.
  A94-10301
All models:
–  Unscrew bolts -arrows-.
–  Take fog light housing out of bumper.
–  Unplug electrical connector.
Installing
Installation is carried out in the reverse order; note the following:
–  Adjust fog lights → Booklet802.
Tightening torques
  A94-0654
ComponentNm
Fog light to bumper4

   

Removing and installing fog lights - Audi RS 4 > < Removing and installing fog lights - Audi A4