Audi Workshop Service and Repair Manuals > A4 Mk1 > Vehicle electrics | Electrical system | Lights, lamps, switches outside | Servicing halogen headlights - vehicles from 02.1999

Renewing bulb for dipped beam headlights

Removing

Headlight (left-side):

–	Remove cover -arrow- from power steering reservoir.

Headlight (right-side):

–	Detach cover (right-side) -arrow- in engine compartment.

–	Unscrew bolts -arrows-.

–	Remove air ducts -1- and -2-.

Both sides (continued):

–	Release retaining clip -2- and detach housing cover -1- from headlight housing.

–	Detach electrical connector -2- at dipped beam bulb.

–	Disengage retaining clip -2- and remove bulb -3- from headlight housing.

Installing

Installation is carried out in the reverse order; note the following:

–	Fit new bulb in housing; do not touch glass part of bulb with bare hands.

–	Secure bulb with retaining clip.

–	Re-attach connector.

–	Close housing cover and secure with retaining clip.

Audi Workshop Service and Repair Manuals