audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Renewing bulb for turn signal > < Renewing bulb for main beam headlights
Renewing bulb for side lights
Renewing bulb for side lights
   
Removing
Headlight (left-side):
–  Remove cover -arrow- from power steering reservoir.
  A10-1160
Headlight (right-side):
–  Detach cover (right-side) -arrow- in engine compartment.
  A13-0368
–  Unscrew bolts -arrows-.
–  Remove air ducts -1- and -2-.
  A10-0746
Both sides (continued):
–  Unplug electrical connector on housing cover.
–  Release retaining clip -2- and detach housing cover -1- from headlight housing.
  A94-10363
–  Release the two retainer tabs and pull bulb holder -1- out of headlight housing -arrow-.
–  Pull bulb for side lights out of bulb holder.
Installing
Installation is carried out in the reverse order; note the following:
–  Insert new bulb in bulb holder, taking care not to touch glass bulb with bare hands.
–  Close housing cover and secure with retaining clip.
  A94-10365

Renewing bulb for turn signal > < Renewing bulb for main beam headlights