Audi Workshop Service and Repair Manuals > A4 Mk1 > Vehicle electrics | Electrical system | Lights, lamps, switches outside | Servicing parking aid | Removing and installing rear parking aid warning buzzer H15 (Saloon)

Removing and installing rear parking aid warning buzzerH15 (saloon)

Removing and installing rear parking aid warning buzzer -H15- (saloon)

Removing

t	Fitting location: on C-pillar (rear left).

–	Switch off ignition and take out ignition key.

–	Remove C/D-pillar trim → Rep. Gr.70.

–	Unplug electrical connector.

–	Unscrew threaded pin for fasteners using a TORX screwdriver.

–	Lift out warning buzzer -1-.

Installing

Installation is carried out in the reverse order; note the following:

–	Install C/D pillar trim → Rep. Gr.70.

Audi Workshop Service and Repair Manuals