audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Pin assignment at steering column switch > < Removing and installing steering column switch

A4 Mk1

Removing and installing lever switch for windscreen wiper/washer, driver information system, lights, turn signals, dipped/main beam headlights and cruise control system
Removing and installing lever switch for windscreen wiper/washer, driver information system, lights, turn signals, dipped/main beam headlights and cruise control system
   
Removing
–  Remove steering column switch → Chapter.
–  Unscrew bolt -arrow-.
–  Detach lever switch -item 1- for windscreen wiper/washer and driver information system from lever switch -item 2- for lights, turn signals, dipped/main beam headlights and cruise control system
Installing
Installation is carried out in the reverse order; note the following:
–  Make sure all retaining hooks and the electrical connectors are properly engaged.
–  Install steering column switch → Anchor.
Tightening torque
  A94-10380
ComponentNm
Lever switch0.5

   

Pin assignment at steering column switch > < Removing and installing steering column switch