| Visual inspection of battery |
| Visually inspect battery before performing measurements, e.g. no-load voltage, relative density of electrolyte or battery load test. |
| t
| Battery housing damaged? Electrolyte can leak out if the housing is damaged. |
| t
| Battery posts (battery cable terminals) damaged? Proper contact of connections is not ensured if battery posts are damaged. This may then result in cable burn-out and electrical system malfunctions. |
| t
| Battery's original sealing plugs fitted? The sealing plugs must be fitted with an O-ring. Only use sealing plugs of same type (same as original equipment) if originals are lost or damaged. |
|
|
|
