audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing vent valves > < Removing and installing actuator

A4 Mk1

Removing and installing vacuum pump
Removing and installing vacuum pump
   
Removing
  Note
The vacuum pump is located beneath the ABS unit -5-.
–  Remove front wheel housing liner (left-side) → Rep. Gr.66.
–  Unscrew nuts -3- and remove vacuum pump -1- with bracket -2- working from wheel housing.
–  Remove vacuum pump with rubber bush from bracket.
4 - Hose routing to actuator
Installing
Installation is carried out in the reverse order; note the following:
–  Install front wheel housing liner (left-side) → Rep. Gr.66.
Tightening torque
  A96-0055
Component Nm
Bracket for vacuum pump to bracket for ABS unit5

   

Removing and installing vent valves > < Removing and installing actuator