| t
| The automatic static headlight range control function corrects the angle of the dipped beam at the start of a journey or with the vehicle stationary. |
| t
| One level sender each at the front and rear axle signals the suspension compression status of the vehicle. A signal proportional to the vehicle speed is also processed. |
| t
| The control unit evaluates these signals and actuates the headlight range control motors with dipped beam switched on. |
| t
| If, on interrupting a journey, a load is detected (passengers entering the vehicle) from a change in the compression status of the suspension, the headlights are adjusted automatically to the load condition. |
| t
| Drivers are made aware of system faults by way of a warning symbol in the centre display of the dash panel insert. |
| Components of automatic headlight range control system: |
| 1 - | Headlight range control unit -J431- |
| 2 - | Rear left vehicle level sender -G76- |
| 3 - | Front left vehicle level sender -G78- |
| 4 - | Left headlight range control motor -V48- |
| 5 - | Right headlight range control motor -V49- |
|
|
|
