Audi Workshop Service and Repair Manuals

Emergency starting function with -VAS 5051B- The emergency starting function can be used to release a vehicle with disabled immobilizer to drive it to the nearest Audi dealership. Sequence of operations l  The customer must furnish proof of authorisation to use the vehicle or ownership by showing the vehicle documents and personal identification. l  Vehicle diagnostic, testing and information system -VAS 5051B- connected and vehicle self-diagnosis selected → Chapter –  Establish the immobilizer identification number by starting immobilizer self-diagnosis → Chapter. –  Obtain the 7-digit PIN from the applicable regional sales centre/importer on the basis of the 14-position immobilizer identification number.   Note The PIN is only valid for one day, after which a new number has to be requested. The PIN is of no use to the customer or other dealerships.

Display on -VAS 5051B-: –  From list -1- select function “Release (PIN)”.

Display on -VAS 5051B-

Vehicle self-diagnosis					17 - Dash panel insert 8D0919880
Functional test					B5 DASH PANEL INSERT UN4 D15
Release (PIN)					Code 42 Workshop code 12345
Information
The PIN is used to release								Finished
key matching or adaption in the vehicle system
The PIN obtained for the
immobilizer identification number
is only valid on the day it is requested
←	Measurement				Go to	Print		Help

–  Touch the Finished key.

Display on -VAS 5051B-

Vehicle self-diagnosis					17 - Dash panel insert 8D0919880
Functional test					B5 DASH PANEL INSERT UN4 D15
Release (PIN)					Code 42 Workshop code 12345
PIN entry
Enter PIN obtained with the displayed
keypad.
Confirm PIN entered with Continue key (→ key)
Press here to display
entry keypad
←	Measurement				Go to	Print		Help	→

–  Touch key Press here to display entry keypad.

Display on -VAS 5051B-

Vehicle self-diagnosis					17 - Dash panel insert 8D0919880
Functional test					B5 DASH PANEL INSERT UN4 D15
Release (PIN)					Code 42 Workshop code 12345
1	2	3	+		A	B	C	D
					E	F	G	H
4	5	6	–		I	J	K	L
					M	N	O	P
7	8	9	.		Q	R	S	T
					U	V	W	X
C	0	Q			Y	Z
←	Measurement				Go to	Print		Help	→

–  Use the keypad to enter the previously established 7-digit PIN. –  Touch → key.

Display on -VAS 5051B-

Vehicle self-diagnosis					17 - Dash panel insert 8D0919880
Functional test					B5 DASH PANEL INSERT UN4 D15
Release (PIN)					Code 42 Workshop code 12345
PIN entry
PIN XXXXXXX entered correct?								Yes
								No
←	Measurement				Go to	Print		Help

–  Check entry and then touch Yes key. –  Incorrect PIN entry can be corrected by touching No key.

Display on -VAS 5051B-

Vehicle self-diagnosis					17 - Dash panel insert 8D0919880
Functional test					B5 DASH PANEL INSERT UN4 D15
Release (PIN)					Code 42 Workshop code 12345
Transfer PIN
PIN valid!								Finished
Key matching/adaption can
be performed
←	Measurement				Go to	Print		Help

–  Touch the Finished key. Once the release (PIN) procedure has been successfully completed, the immobilizer warning lamp -K117- lights constantly and the immobilizer is released as follows: t  For as long as the engine runs and the ignition key is left in position. t  For 45 minutes, as long as the ignition key is left in position (engine not running). t  For 10 minutes if the ignition key is removed.

Display on -VAS 5051B-: –  From list -1-, select function “06 - End of output”. –  Switch off ignition and then start engine.