Audi Workshop Service and Repair Manuals

Adaption channels 02 … 09 Adaption channel 02 - Service interval display reset on completion of service t  The service interval display is designed to remind drivers that service is due. The messages appear on the centre display. t  The service prompt appears as of 1 month or 2000 km before service is due. Example: “SERVICE IN 2000 KM” is displayed after a total mileage of 13000 km. t  The remaining mileage prior to service can be interrogated by way of the menu in the centre display by pressing the time setting button once. t  If service is due, the corresponding message appears in the centre display for 5 seconds after switching on the ignition. It appears after the automatic gearbox information and any navigation system destination input. Display: “SERVICE!”. t  Applicable specifications → Booklet802. t  The “adaption channels 40, 41, 46, 47, 48” used to display the dynamic service values are automatically set to “0”.

Display on -VAS 5051B-: 1 -  Enter channel number –  On the keypad -2-, touch key 2 for “Adaption channel 02” and confirm the entry by touching the Q key.

Display on -VAS 5051B-: 1 -  Channel 2 reading and testing 4 -  Bar set to current adaption value

Type of service
0	Service not due
1	Service due

Service is reset by means of the following adaption values:

Erasing service
0	Erase service

–  Use the bar to alter the adaption value ⇒ “A - Altering adaption value by way of bar” → Anchor. Or –  Alter the adaption value by means of direct entry ⇒ “B - Altering adaption value by means of direct entry” → Anchor.

Display on -VAS 5051B- following successful adaption: 1 -  Channel 2 value 0 stored   Note t  “SERVICE IN 15000 KM” is displayed in the dash panel insert. t  15000 km is the starting value for the service interval display. Conversion to higher mileage (e.g. 30000 km for petrol engines) only takes place when the vehicle is driven. –  Check the service specifications in “measured value blocks 013 … 016” → Anchor.

Adaption channel 03 - Correction of fuel consumption indicator characteristic curve On vehicles with driver information system (DIS), this function can be used to correct the characteristic curve of the fuel consumption indicator if the display in the dash panel insert does not correspond to the actual fuel consumption. Display on -VAS 5051B-: 1 -  Enter channel number –  On the keypad -2-, touch key 3 for “Adaption channel 03” and confirm the entry by touching the Q key.

Display on -VAS 5051B-: 1 -  Channel 3 reading and testing 2 -  Fuel consumption indicator 4 -  Bar set to current adaption value   Note t  The value “100” is the factory-set mean characteristic curve of the fuel consumption indicator. t  The characteristic curve can be altered in the range 85 … 115 %; entries must be made in 5 % steps. t  On dash panel insert replacement → Chapter. –  Use the bar to alter the adaption value ⇒ “A - Altering adaption value by way of bar” → Anchor. Or –  Alter the adaption value by means of direct entry ⇒ “B - Altering adaption value by means of direct entry” → Anchor. –  Enter the adaption value.

Example:	Characteristic curve of fuel consumption indicator “90 %”
	Keypad entry 90

Note The fault message “Function unknown or cannot be implemented at present” appears if an implausible value is entered.

Display on -VAS 5051B- following successful adaption. Example: 1 -  Channel 3 value 90 stored –  Terminate function “10 - Adaption” by touching ← key.

Adaption channel 04 - Language version of driver information system (DIS) Display on -VAS 5051B-: 1 -  Enter channel number –  On the keypad -2-, touch key 4 for “Adaption channel 04” and confirm the entry by touching the Q key.

Display on -VAS 5051B-: 1 -  Channel 4 reading and testing 2 -  Language 4 -  Bar set to current adaption value The language version is adapted by means of the following input values:

Language version
1	German
2	English
3	French
4	Italian
5	Spanish
6	Portuguese
8	Chinese

–  Use the bar to alter the adaption value ⇒ “A - Altering adaption value by way of bar” → Anchor. Or –  Alter the adaption value by means of direct entry ⇒ “B - Altering adaption value by means of direct entry” → Anchor. –  Enter the adaption value.

Example:	Language version German = “1”
	Keypad entry 1

Display on -VAS 5051B- following successful adaption. Example: 1 -  Channel 4 value 1 stored –  Terminate function “10 - Adaption” by touching ← key. Adaption channel 09 - Mileage counter reading This function is used to adapt the mileage counter reading on replacing the dash panel insert.   Note t  Adaption is only possible for dash panel inserts with a mileage reading of up to max. 100 km. t  Adaption can only be performed once for a given dash panel insert. t  It is only possible to enter a higher adaption value (above 100 km). t  Up to Model Year 2001: Once confirmed, incorrect entries cannot be corrected. The dash panel insert must then be replaced. t  As of Model Year 2002: Incorrect entries can be corrected until a distance of 5 km has been covered once following the first change. t  Adaption is performed in miles in countries with a speedometer display in miles.

–  Start dash panel insert self-diagnosis → Chapter. Display on -VAS 5051B-: –  From the list -1-, select function “11 - Login procedure” or “11 - Encoding II”.

Display on -VAS 5051B-: 1 -  Enter code word –  Use the keypad -2- to enter the code number 13861. –  Confirm entry by touching Q key.

Display on -VAS 5051B-: 1 -  Function successfully implemented –  Touch ← key.

Display on -VAS 5051B-: –  From list -1- select function “10 - Adaption”.

Display on -VAS 5051B-: 1 -  Enter channel number –  On the keypad -2-, touch key 9 for “Adaption channel 09” and confirm the entry by touching the Q key.

Display on -VAS 5051B-: 1 -  Channel 9 reading and testing 2 -  Kilometre reading in units of 10 km 4 -  Bar set to current adaption value –  Touch keypad key -Item 3-.

Display on -VAS 5051B-: 1 -  Enter adaption value –  Enter the adaption value on the keypad -2- (take reading from old dash panel insert or from “Measured value block 002” → Anchor).

X					Hundred thousands: 100000 … 655350 km
	X				Ten thousands: 10000 … 90000 km
		X			Thousands: 1000 … 9000 km
			X		Hundreds: 100 … 900 km
				X	Tens: 10 … 90 km
					Units: Round up to next ten

Example:	Mileage counter reading “89627 km”
	Keypad entry 8963

–  Confirm entry by touching Q key.

Display on -VAS 5051B-: 1 -  Store channel 9 2 -  Kilometre reading in units of 10 km 4 -  Original value 0 new value 8963 –  Confirm the new adaption value by touching the Accept key -3-.

Display on -VAS 5051B- following successful adaption. Example: 1 -  Channel 9 value 8963 stored –  Terminate function “10 - Adaption” by touching ← key.