A4 Mk1
Overview of battery -A- / transmitter and receiver unit / fuse / wiring harness |
A - | Battery -A- |
q | Installation position, disconnecting → Electrical system; Rep. gr.27 |
B - | Telephone transmitter and receiver unit |
q | Installation position, removing and installing → Communication; Rep. gr.91 |
C - | Wiring harness |
q | Has to be made up |
q | Positive cable (terminal 30) 2.5 Ø (red) |
q | Earth cable (terminal 31) 2.5 Ø (brown) |
q | Positive cable (terminal 15a) 1.5 Ø (black) |
D - | Fuse holder |
q | In immediate vicinity of battery -A- |
E - | Terminal 15a |
q | Always connected to output of terminal 15a |
q | Wiring must be protected by a fuse |
q | Fuse max. 15 A |
F - | To starter -B- |
q | Original wire |
G - | Body earth |
q | Immediately next to battery -A- |
H - | Transmission/reception aerial |
q | Fitting locations → Chapter |
J - | Aerial earth |
q | Good, firm connection/corrosion protection |
K - | Screened aerial wire |
q | Wire with coaxial connector |
L - | Positive connection |
q | Attach red cable with terminal A6-2.5 beneath nut |
q | Route wiring harness separately if possible |
M - | Negative cable |
q | Attach brown cable with terminal A6-2.5 beneath nut |
q | Route wiring harness separately if possible |