Audi Workshop Service and Repair Manuals

• Video connection; 11-pin connector for connecting operating electronics control unit, navigation in centre console
• Video input; 4-pin connector (SVHS)
• Video input; 2-pin connector (yellow cinch socket) for image signal
• Video input; 2-pin connector (two cinch sockets, white and red) for sound signal from left and right channel

• Power supply; 6-pin connector for power supply and control bus connections
• TV aerial connection; connection to TV aerial amplifier 4 at rear window (at rear side window in Avant vehicles)
• TV aerial connection; connection to TV aerial amplifier 3 at rear window (at rear side window in Avant vehicles)
• TV aerial connection; connection to TV aerial amplifier 2 at rear window (at rear side window in Avant vehicles)
• TV aerial connection; connection to TV aerial amplifier 1 at rear window (at rear side window in Avant vehicles)

Contact assignment of multi-pin connectors for TV tuner

Note:

Connector contacts not listed have not been assigned.

→ Video connection (RGB video input)

Multi-pin connector, 11-pin

•     1 -    AF earth
•     2 -    AF left
•     3 -    AF right
•     4 -    Video signal (CSYNC)
•     5 -    Video earth
•     6 -    PAL/NTSC
•     7 -    V switch
•     8 -    Input B
•     9 -    Input G (yellow input signal)
•     10 -    Input R
•     11 -    Screen earth

→ Connector for power supply and control bus connections

•     1 -    Earth, terminal 31
•     2 -    Power supply, terminal 30
•     3 -    Data bus high
•     4 -    Terminal 15
•     5 -    Earth, terminal 31
•     6 -    Data bus low