audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Erasing fault memory > < Fault table for navigation system II-D
Radio, Telephone and Navigation System - Self-diagnosis
Self-diagnosis of navigation system II-D (Navigation System Plus) (from week 48/99)
Final control diagnosis

Notes:

  • ◆ Final control diagnosis can only be performed with vehicle stationary and engine stopped.
  • ◆ The navigation system must be switched on.
  • ◆ If final control diagnosis detects a fault, locate and eliminate cause of problem if necessary.
  • ◆ Final control diagnosis can only be performed once. Ignition must be switched off and on again if final control diagnosis is to be repeated.

Performing final control diagnosis:

  • ‒ Press keys 0 and 3 to select "Final control diagnosis" function.
 
→ Indicated on display:
Rapid data transfer    Q
03 -Final control diagnosis
  • ‒ Confirm entry with Q key.
 
→ Indicated on display:
Final control diagnosis    ⇒
Telephone/navigation systems loudspeaker -R39

A high-pitch signal is emitted for about three seconds from the loudspeaker (hands-free loudspeaker or loudspeaker at front left).

  • ‒ Press ⇒key.
 
→ Indicated on display:
Final control diagnosis    ⇒
Output radio display dash panel insert

Dash panel insert displays the following test pattern:



DISPLAY
TEST

The test pattern covers the entire display.

The display changes between normal and inverse every 4 seconds.

  • ‒ Press ⇒ key.
 
→ Indicated on display:
Final control diagnosis    ⇒
End
  • ‒ Press ⇒key.
  • ‒ Tester returns to basic function.
 
→ Indicated on display:
Rapid data transfer     HELP
Select function XX

Erasing fault memory > < Fault table for navigation system II-D