audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Ending output > < Final control diagnosis
Radio, Telephone and Navigation System - Self-diagnosis
Self-diagnosis of navigation system II (Navigation System Plus)
Erasing fault memory

Note:

If fault memory cannot be erased, interrogate fault memory again and eliminate fault.

Requirements:

  • ◆ Fault memory interrogated =>Page 01-11
  • ◆ All faults eliminated

After fault memory interrogation:

 
→ Indicated on display:
Rapid data transfer     HELP
Select function XX
  • ‒ Press keys 0 and 5 to select "Erase fault memory" function.
 
→ Indicated on display:
Rapid data transfer    Q
05 - Erase fault memory
  • ‒ Confirm entry with Q key.
 
→ Indicated on display:
Rapid data transfer    ⇒
Fault memory erased

Fault memory has now been erased.

  • ‒ Press ⇒ key.
 
→ Indicated on display:
Rapid data transfer     HELP
Select function XX

Notes:

 
→ Test sequence has not been correctly implemented if adjacent display appears.
Attention:    ⇒
Fault memory not interrogated

 
→ Test sequence has not been correctly implemented if adjacent display appears.
Rapid data transfer    ⇒
Fault memory not interrogated

Keep exactly to test sequence: Interrogate fault memory first, eliminate any faults and then erase fault memory.

Ending output > < Final control diagnosis