audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Connecting vehicle diagnostic, testing and information system VAS 5051 or fault reader V.A.G 1551, and selecting functions > < Reading measured value block

A4 Mk1

Radio, Telephone and Navigation System - Self-diagnosis
Self-diagnosis of TV tuner
Adaption

The "Adaption" function can be used to adapt the TV tuner to the local station setup.

Adaption table:

Adaption channel

Adaption function

01

Station setup

Performing function "10 - Adaption"
 
→ Indicated on display:
Rapid data transfer    HELP
Select function XX
  • ‒ Press keys 1 and 0 to select "Adaption" function.
 
→ Indicated on display:
Rapid data transfer    Q
10 - Adaption
  • ‒ Confirm entry with Q key.
 
→ Indicated on display:
Adaption
Enter channel number XX
  • ‒ Enter desired adaption channel (adaption table => Page 01-382).
  • ‒ Confirm entry with Q key.

Note:

After changing adaption value/following termination of an adaption channel, function "10 - Adaption" must be performed again to select a different adaption channel.

Station setup
 
→ Indicated on display:
Adaption
Enter channel number XX
  • ‒ Press keys 0 and 1 to select "Channel 1".

Note:

Wrong entries can be corrected by pressing C key.

  • ‒ Confirm entry with Q key.
 
→ Indicated on display:
Channel 1    Adaption    0    ⇒
    

Top line shows selected channel and currently stored station setup.

  • ‒ Press ⇒ key.
 
→ Indicated on display:
Channel 1    Adaption    0    ⇒
Enter adaption value XXXXX
  • ‒ Enter new station setup, placing a 0 in front of the 4-digit number (e.g. 0001).
  • ‒ Confirm entry with Q key.
 
→ Indicated on display:
Channel 1    Adaption    1    Q
    
  • ‒ Confirm entry with Q key.
 
→ Indicated on display:
Channel 1    Adaption    1    Q
Store altered value?
  • ‒ Confirm entry with Q key.
 
→ Indicated on display:
Channel 1    Adaption    1    ⇒
Altered value stored
  • ‒ Press ⇒ key.
 
→ Indicated on display:
Rapid data transfer     HELP
Select function XX
  • ‒ Press keys 0 and 6 to select "End output" function.
  • ‒ Press ⇒ key.

Local station setup

Fitting plant

Adaption value

Ingolstadt

0

Neckarsulm

1

Wolfsburg

2

Emden

3

Connecting vehicle diagnostic, testing and information system VAS 5051 or fault reader V.A.G 1551, and selecting functions > < Reading measured value block