audi Workshop Repair Guides

Audi A4 Workshop Manuals and Auto Repair Service

ABOUT US
Exploded view of components for PAX run-flat tyres > < General information on wheels and tyres

Exploded view of components for alloy wheels and tyres

Exploded view of components for light alloy wheels
Exploded view of components for light alloy wheels
  Note
t  On rims with bonded wheel trims, take care not to scratch the wheel trims.
t  Wheel trims have a very sensitive surface.
t  If a wheel trim is damaged, the rim must be renewed.
   
t  The wheel trim cannot be renewed.
Overview of light alloy wheel
Wheel change/wheel fitting instructions → Chapter
  A44-10265
1 - Tyre
2 - Valve
q   Always renew
q   Use only correct valves as specified in → Electronic parts catalogue
3 -  Wheel
q   Observe the fitting instructions → Chapter
4 - Wheel bolt
q   Observe the fitting instructions → Chapter
q   Tightening torques for wheel bolts → Chapter
q   Anti-theft wheel bolt → Fig.
5 - Adapter for wheel bolt
q   Attach to corresponding wheel bolt → Fig.
6 - Cap for wheel bolts
7 - Trim cap
8 - Wheel bolt
  Note
t  Make sure that the correct type of wheel bolts are fitted; refer to → Electronic parts catalogue.
t  Always use the same type of wheel bolts on all four rims of a vehicle.
q   Observe the fitting instructions → Chapter
q   Tightening torques for wheel bolts → Chapter
9 - Adhesive balancing weights
q   Not more than 60 g permitted per rim flange
q   Remove dirt and grease from wheel rim at bonding point
q   Pull off backing foil
q   Bond on balancing weights at surfaces provided for this purpose

   

Exploded view of components for PAX run-flat tyres > < General information on wheels and tyres