| Wheel electronics (TPM) - Siemens system |
WARNING | After using tyre sealant, the wheel electronics on the affected wheel must be renewed. |
|
| t
| A micro-encapsulated bolt is not used in conjunction with the Siemens wheel electronics. |
| t
| A union nut → Item is used to hold the wheel electronics in position in the rim. |
| t
| The metal valve body acts as an antenna. |
| t
| Connection between metal valve body and wheel electronics must not be interrupted. |
WARNING | When pressing wheel electronics against base of rim, counter-hold metal valve by hand from opposite side. Connection between metal valve and wheel electronics must not be interrupted or broken. The wheel electronics must be renewed if damaged. |
|
| –
| Press wheel electronics against base of rim. |
| –
| Fit union nut to metal valve and tighten to secure wheel electronics → Chapter. |
|
|
|
