audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing rear lid lock > < Removing and installing rear lid lock cylinder

A4 Mk2

Removing and installing handle trim for rear lid
Removing and installing handle trim for rear lid
Removing
–  Remove rear lid lock cylinder → Chapter.
–  Unplug electrical connector on inside of handle trim.
   
–  Unscrew the four nuts -1- and -2- (different versions; mark for re-installation).
–  Tightening torque: 8 Nm
–  Press down both retaining hooks -arrows- and detach handle trim -3-.
Installing
Install in reverse order of removal.
  A55-0202

Removing and installing rear lid lock > < Removing and installing rear lid lock cylinder