audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing gas strut for rear lid > < Adjusting rear lid

A4 Mk2

Removing and installing rear lid hinge
Removing and installing rear lid hinge
Removing
   
–  Detach cover -1- for rear lid hinge and cable duct -2- from rear lid hinge -arrows-.
  A55-0197
–  Detach outer roof frame trim -1-. To do so, release trim from retaining clips -2-, lift trim and guide lugs -arrows- around hinges.
–  Remove D-pillar trim → Trim, insulation; Rep. gr.70.
  Note
Prop up and secure rear lid to avoid damaging paintwork.
  A55-0194
–  Unscrew nuts -arrows-.
  A55-0199
–  Remove bolts -arrows- (left and right).
–  Detach hinge.
Installing
Installation is carried out in reverse order; note the following:
–  When installing tighten to 21 Nm.
–  Adjust rear lid → Chapter.
  A55-0195

Removing and installing gas strut for rear lid > < Adjusting rear lid