–
| Unscrew Torx bolts -2--T30- and detach motor. |
–
| When installing, make sure threaded pins -arrows- are engaged in inner door panel. |
–
| Push on window regulator motor -1- and secure with bolts -2-. |
–
| Tightening torque: 3.5 Nm |
Note t
| After installing the electric motor and attached wiring, first turn the ignition on and then off again. |
t
| Then raise door window as far as it will go and keep window regulator switch pulled for approx. 2 seconds. |
t
| The window regulator is now in the basic setting and the opening/closing function is activated. |
|
|
|